CKM Industrial Sales
www.ckmindustrialsales.com

(513) 474-7660
Industrial/Municipal line.gif (58 bytes) Analyzers line.gif (58 bytes) Instrumentation line.gif (58 bytes) Chemical Feed line.gif (58 bytes) Automated Systems


Home Page About Us Products Featured Products Contact Us

Featured Products
Model S4000C

Model S4000C

The Model S4000C Intelligent Sensor is a microprocessor-based transmitter designed for use with General Monitors' catalytic bead sensors. The unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It is designed to monitor combustible gases and vapors within the lower explosive limit (LEL) and provide status indication and alarm outputs. CSA, CENELEC approved.

S4000C Features and Benefits
Sensor can be remote mounted up to 7,600 ft. (2,320 m) Increased installation flexibility
Three (3) digit digital display Displays gas concentrations in %LEL, fault codes for troubleshooting and calibration prompts
4-20mA output Industry standard output for remote alarm and fault indication
Dual redundant MODBUS communications Provides complete status and control capability in the Control Room
Warning, alarm & fault relays Provides local alarm capability
Calibration, calibration check, setup mode Simplifies operation and maintenance
Remaining sensor life indication Reduces downtime by providing "heads-up" on sensor life

Applications

Refineries

Drilling Rigs
    and Platforms

 Gas Collection
    and Distribution
    Facilities

 Gas and Oil
    Production
    Platforms

Solvent Vapors

LNG / LPG
    Processing and
    Storage Facilities

Chemical Plants

 Wastewater
    Treatment
    Facilities
Model FL3100

Model FL3100

The Model FL3100 is an Ultraviolet / Infrared flame detector designed to detect unwanted fires and provide alarm outputs directly from the detector while maintaining false alarm immunity.

FL3100 Series flame detectors' electronics are integral within their explosion-proof housings, allowing detector information to be processed at the point of detection. The detectors also provide a 4-20mA stepped output signal indicating detector status. The COPM (Continuous Optical Path Monitoring) self-test feature checks the optical path integrity (window cleanliness) and the detectors' electronic circuitry once every minute.

FL3100 Features and Benefits
Wide field of view Greater fire detection coverage
4-20mA stepped output Industry standard for remote alarm and fault indication
RS-485 MODBUS RTU serial communications Provides addressable communication link with optional redundancy
Wide operating temperature range Permits operation at higher ambient temperatures
Continuous optical path monitoring (COPM) Checks optical path integrity and detector's electronic circuitry once every minute
Three SPDT high current programmable relay outputs Immediate and time delayed relay outputs for alarm, programmable relay outputs
Applications

Refineries

Drilling and
    Production
    Platforms

Fuel Loading
    Facilities

Compressor
    Stations

Electrostatic Paint
    Spray Booths

LNG / LPG
    Processing and
    Storage Facilities

Gas Turbines

Chemical Plants

Aircraft Hangars



Allen-Bradley
connectivity
via MODBUS

ProSoft Technology, Inc., is a US company specializing in the development of serial communication interface products for Allen-Bradley/Rockwell Automation platforms. They have independently tested General Monitors IR2100, S4100 and FL3100 products for Allen-Bradley PLC/MODBUS connectivity. These products were found to be MODBUS RTU compatible, and compatible with ProSoft's MODBUS Master and Slave products.

Serving Industry For More Than 45 Years
Line_horiz.gif (167 bytes)
CKM Industrial Sales line.gif (58 bytes) 8595 Beechmont Ave line.gif (58 bytes) Cincinnati, Ohio 45255
(513) 474-7660 line.gif (58 bytes) FAX: (513) 474-7661 line.gif (58 bytes) info@ckmindustrialsales.com

Site designed and hosted by @industry, Inc.